|
|
Product Summary
|
- A ground speed oriented or ground speed triggered spreader control
- Available in two or three channel models (EZ 2 or EZ 3)
- Manual proportional control for auger(or conveyor), spinner and auxiliary (pre-wet, cross conveyor) channels
- Adjustable settings from 0-10
- Back lit control panel
- Programmable trim settings
|
|
|
Product Application
|
- Entry level electric controller for spreading granular material with or without pre wet
|
|
Proportional Application
Channel Options
|
- Independent control of 2 or 3 proportional channels
- Usually configured for auger/conveyor, spinner and either cross auger or pre-wet
|
|
|
Ground Speed Options
|
- Ground Speed Triggered (GST): on with truck motion, off with truck motion
- Ground Speed Oriented (GSO): on with truck, automatically adjusts output
to compensate for truck speed, off when truck stops
|
|
|
Hydraulic Trimming
|
- Configuration mode for hydraulic trimming without manual trim pots
|
|
|
Blast and Pass
|
- Programmable Blast Included (on/off, timed)
- Remote Blast and Remote Pass accessible using Cirus plow controls
|
|
|
Output Signal
|
- Multiple Frequency settings for ease of valve compatibility
|
|
|
Power Safety
|
- Power Safe™ signals prevents random grounds powering any hydraulics system attached (auger, spinner, conveyor, etc)
- Channel Safe™ detects and protects against open or short circuits on hydraulic drive channels
|
|
|
System Mounting
|
- Flip-Arm or Mongoose arm Console
- Seat mount or pedestal mount
- Stand Alone
|
|
|
Black Tip Combination
|
- Integrates with Black Tip for one ton plow control applications
|
|
|
Operating Temperature Range
|
- Minimum: -20 degrees Centigrade
- Maximum: 70 degrees Centigrade
|
|
|
Power Requirements
|
- Minimum: 11 volts DC
- Maximum: 15 volts DC
- Maximum: 10 Amps
- Fuse rated at 10 Amps
|
|
Adobe Acrobat)
